[HELP] My server is not registering ! (Page 1 of 2)

No i don't run 2 servers at the same time.. It's just not responding ):

Nice signature TeePhoenix.. Specially because i live in USA Q_Q

Well i agree with what you said.. But let's not get into politics !

sv_name [FTeen]'s Dm Server !
sv_scorelimit 25
password
sv_rcon_password ThisIsTotallyNotThePassword
sv_timelimit 10
sv_gametype dm
sv_warmup 8
sv_rounds_per_map 5
sv_spectator_slots 2
sv_max_clients 16
sv_teambalance_time 1
sv_port 8303
sv_external_port
sv_bindaddr
sv_map DmFT
sv_maprotation
sv_motd
sv_tournament_mode 0
sv_powerups 1
sv_spamprotection 1
sv_teamdamage 0
sv_vote_kick_bantime 2
sv_vote_kick 1
sv_high_bandwidth 0
sv_register 1

Well no.. I tried DDrace and XXLDDrace and none worked.. I have NO clue why.. It has always worked and i have re opened my ports again.. and all steps were succeful.. I even tried turning off my firewall and nothing.. As i mentioned before port 8303 and 9000 are enabled to be let thru.. and nothing it just doesn't want to work. :L

I'm sorry but what do you mean by console output. And i haven't changed anything.. I even recovered all the files from my recycling bin and nothing..

This is a bit awkward.. Don't worry i'm not a computer noob.. I know Css Php C++ And many more programming languagues i just didin't understood what you meant by console output.. Yes, I use Windows 7.

[4f2b0af9][server]: starting...
[4f2b0af9][datafile]: loading. filename='maps/DmFT.map'
[4f2b0af9][datafile]: allocsize=3972
[4f2b0af9][datafile]: readsize=3808
[4f2b0af9][datafile]: swaplen=3828
[4f2b0af9][datafile]: item_size=3388
[4f2b0af9][datafile]: loading done. datafile='maps/DmFT.map'
[4f2b0af9][server]: maps/DmFT.map crc is c4526c84
[4f2b0af9][server]: server name is '[FTeen]'s Dm Server !'
[4f2b0af9][datafile]: loading data index=17 size=225 uncompressed=9000
[4f2b0af9][server]: version 0.6 626fce9a778df4d4
[4f2b0af9][engine/mastersrv]: refreshing master server addresses
[4f2b0af9][register]: refreshing ip addresses
[4f2b0af9][engine/mastersrv]: saving addresses
[4f2b0af9][register]: fetching server counts
[4f2b0af9][register]: chose 'master1.teeworlds.com' as master, sending heartbeats

Isn't the logfile what you wanted ? By the way.. I was using Teeworlds Server Creator.. Just to see if i had done anything wrong.. Well apparently i wasn't I re-did what i do to create a server.. Copy the server.exe make a shortcut Properties -f serverconfig.cfg ETC my autoexec.cfg serverconfig.cfg but still nothing..

Well before it used to show that the server's gamemode had been changed to DM and team'something' was set to 0

But then it said that i had to configure my firewall/net to let thru port 8303 ( I also tried with 9000, another port i have opened on my router )

By autoexec.cfg i mean Auto executable When the server is run the server settings automatically change to the given ones inside that file.. for example sv_gravity 'value'

This is what it says [4f2b0eaf][server]: starting...
[4f2b0eaf][datafile]: loading. filename='maps/DmFT.map'
[4f2b0eaf][datafile]: allocsize=3972
[4f2b0eaf][datafile]: readsize=3808
[4f2b0eaf][datafile]: swaplen=3828
[4f2b0eaf][datafile]: item_size=3388
[4f2b0eaf][datafile]: loading done. datafile='maps/DmFT.map'
[4f2b0eaf][server]: maps/DmFT.map crc is c4526c84
[4f2b0eaf][server]: server name is '[FTeen]'s Dm Server !'
[4f2b0eaf][datafile]: loading data index=17 size=225 uncompressed=9000
[4f2b0eaf][server]: version 0.6 626fce9a778df4d4
[4f2b0eaf][engine/mastersrv]: refreshing master server addresses
[4f2b0eaf][register]: refreshing ip addresses
[4f2b0eaf][engine/mastersrv]: saving addresses
[4f2b0eaf][register]: fetching server counts
[4f2b0eb0][register]: chose 'master1.teeworlds.com' as master, sending heartbeats

[4f2b0eb7][game]: start round type='DM' teamplay='0'

[4f2b0ee4][register]: ERROR: the master server reports that clients can not connect to this server.
[4f2b0ee4][register]: ERROR: configure your firewall/nat to let through udp on port 8303.

Check this line [4f2b0eb7][game]: start round type='DM' teamplay='0' Now it appeared.. But before it did not.

Yes i meant to say tune gravity, my bad.. Well i hope what you said will work I think topic can be closed.

Yes i know i could be banned for making the gametype DM CTF or TDM with a modified client but yet it is Vanilla and nope i had not seen that line before either.

And i'm going to try to turn off anti virus or something.. As of now.. Nothing has changed

Still nothing when i turn off my anti virus.. Now this is really getting weird.. I have checked and checked my firewall my ports and everything is correct.

Router: D-Link - DIR-615 (D-Link v3 Firmware)
Loading Commands...
Number Of Port Forwards To Send To Router (2)
Running Commands...

(Current -  1/2)
Adding Teeworlds (UDP) For Ports 8303-8303 To 192.168.0.100()

Running Script From Database For Selected Router
-----------------------------------------------------------------------
Step 01. nav_first_only("")
(Successful) (http://192.168.0.1/)
--------------------------------------
Step 02. set_password("log_pass")
(Successful)
--------------------------------------
Step 03. click_button_first_only("login")
(Successful)
--------------------------------------
Step 04. timeout("2000")
(Successful)
--------------------------------------
Step 05. nav_first_only("adv_portforward.asp")
(Successful) (http://192.168.0.1/adv_portforward.asp)
--------------------------------------
Step 06. timeout("2000")
(Successful)
--------------------------------------
Step 07. check_if_name_exists("")

This Entry (Teeworlds) Already Exists On The Router, This Entry Will be Skipped.
-----------------------------------------------------------------------

Finished Adding Teeworlds

(Current -  2/2)
Adding Teeworlds2 (UDP) For Ports 9000-9000 To 192.168.0.100()

Running Script From Database For Selected Router
-----------------------------------------------------------------------
Step 01. nav_first_only("")
--------------------------------------
Step 02. set_password("log_pass")
--------------------------------------
Step 03. click_button_first_only("login")
--------------------------------------
Step 04. timeout("2000")
(Successful)
--------------------------------------
Step 05. nav_first_only("adv_portforward.asp")
--------------------------------------
Step 06. timeout("2000")
(Successful)
--------------------------------------
Step 07. check_if_name_exists("")

This Entry (Teeworlds2) Already Exists On The Router, This Entry Will be Skipped.
-----------------------------------------------------------------------

Finished Adding Teeworlds2

-------------------DONE! (All Commands Finished)-------------------

As you can see all the steps are succeful same thing applies to my port 9000

I do use WIndows firewall.. That's my port opener showing you that my ports are successfully opened and that ports are not the problem. This is driving me insane at the moment.

Okay I did it, time for the moment of truth.

No, unfortunately not yet.

ERROR: the master server reports that clients can not connect to this server.