1 Topic by SerhanP

  • SerhanP
  • New member
  • Offline

Topic: [Help]Portforwarding with D-Link DIR-615

Hey guys!
I wanted to create an server, but I need help with portforwarding. I have D-Link DIR-615.
UPnP is enabled!

My configuration:
http://i56.tinypic.com/t9xkeu.png
(I know, it's German)

2 Reply by wappsify

  • wappsify
  • wappsify
  • Donor
  • Offline

Re: [Help]Portforwarding with D-Link DIR-615

Hey,
First: for teeworlds you only need to open UDP.
And then, did you open the port in your firewall?
Also please say, if you are using the Router software, or if you use an external program like Simple Port Forwarding
With this software it's much easier to open Ports, I had an Dlink Router aswell, the router software is not really structured (don't know if this is the right word).

wapps.

burn the land and boil the sea, you can't take the sky from me.

3 Reply by SerhanP (edited by SerhanP 2010-12-22 23:11:02)

  • SerhanP
  • New member
  • Offline

Re: [Help]Portforwarding with D-Link DIR-615

Thanks for the answer!
1. Only UDP... Ok!
2. I have McAfee and it's deactivated (cause it sucks) big_smile
3. I use http://192.168.0.1/ to change them. I'll try it with Simple Port Forwarding!

EDIT: Tried it with Simple Port Forwarding. I tested it but it doesn't work!

4 Reply by Lanta

  • Lanta
  • Lanta
  • Member
  • Offline

Re: [Help]Portforwarding with D-Link DIR-615

Wait wait...
you wrote as IP address 192.168.0.1, which is the router IP. It's wrong!
In the port forwarding page you must write the internal IP of the computer that is hosting the teeworlds server. Go on your PC, open a CMD and type "ipconfig" to see your IP. If you are under Linux, "ifconfig" in terminal.

Remember, you must have a static IP or this system will only work the first time.

Support Staff - ESL.eu Teeworlds Admin

5 Reply by SerhanP (edited by SerhanP 2010-12-23 11:44:33)

  • SerhanP
  • New member
  • Offline

Re: [Help]Portforwarding with D-Link DIR-615

Weird... if I type ipconfig then something appears and disappear instantly.
But I think that you mean 192.168.0.100

EDIT: Ok... ipconfig works!
It's 192.168.0.100!

EDIT 2: I changed it. Doesn't work!
"ERROR: configure your firewall/nat to let through udp on port 8303.

I need help...

6 Reply by dimi

  • dimi
  • New member
  • Offline

Re: [Help]Portforwarding with D-Link DIR-615

didnt you forget to set the checkboxes?
http://img190.imageshack.us/img190/3993/t9xkeu.png

7 Reply by SerhanP

  • SerhanP
  • New member
  • Offline

Re: [Help]Portforwarding with D-Link DIR-615

Oh... thanks!

I tried it with my second and slow router (telekom) and it worked...