You are not logged in. Please login or register.
Teeworlds Forum → Support → Internet Server hosting Problem
Hi,
Sorry for my bad English. Now the question:
When I host a server I always see the error that you can't connect to my server.
It says I should forward port 8303.
But I have forwarded this port Tcp AND Udp
And it doesn't work. My Firewall lets Teewars pass throug all ports
What shall I do?
Can you see your server in the master listing?
I have noticed that I can not connect to make own server via the internet menu, others can. When I the LAN menu it works.
When I use the Lan menu I can connect to my server.
I don't see my server in the internet List.
Hm.. But there's this error in the cmd-console.
Error: Others can't connect ...
Error: .... open udp 8303 .....
ok, that would suggest that the master server can not reach your server.
I have a Netgear router, in this router I set the following in the Port Forwarding menu:
Service Name: Teewars
Starting Port: 8303
Ending Port: 8303
Server IP Address: 192.168.0.25 (this is the local address of the server)
For me there is no TCP/UDP option.
I hope that helps.
Maybe you should ask a friend, not in your LAN, to try join your server. My couldn't see my server. But I asked my friend, he saw it on the masterlist.
Could you test and then tell me wheather it works?
my IP : 62.227.203.35
Maybe the Problem is my firewall but I don't want to change it.
Any other ideas?
Just tried ... I couldn't connect.
Check your router settings! If you're not sure, post a screenshot of your settings so we can better help you.
Have your checked your local network settings? If you use Windows XP (or Vista) it is possible that you have a firewall set, which would also block connections to 8303.
Ok, now the Screens of everything I did.
My External ip: 62.227.203.35
Server is Running.
First my Ip:
Router Settings 1: 
Router Settings 2:
Comodo Firewall settings on my PC:
Teewars Server Settings:
Teewars Server Parameters:
Teewars Server Running Error:
Just seeing my Server in Lan:
Pro Firewall only controls which programs on your network are allowed to access the internet.
You need to make sure that people from the internet can access you! Check your properties for your network card and make sure that your Windows Firewall allows access to port 8303.
Windows Firewall is off.
Which Properties of my Network card should I change?
What shall I do??
Can Pro Firewall block incoming ports? The screenshot you should is only for outgoing connections (not incoming).
Your router settings look good ... Can you connect to your server using another PC in your LAN? If not, then the problem lies on your machine ... Pro Firewall!?
In my Firewall there is written UDP/TCP Ein/Aus
Ein is the German word for incoming
and Aus is the German word for out
What does Pro Firewall mean?
Do you mean if I can connect over the Lan Menu form the other PC?
I'll test this later
Try to shut down your router for about 5minutes and then turn it on again.
This made mine work.
In my Firewall there is written UDP/TCP Ein/Aus
Ein is the German word for incoming
and Aus is the German word for out
What does Pro Firewall mean?
Do you mean if I can connect over the Lan Menu form the other PC?
I'll test this later
Sorry I meant COMODO Firewall Pro, try disabling it or turning it off. If it works then you know COMODO is blocking the incoming traffic to port 8303.
If I turn of the Firewall, it works...
But this can't be a solution...
I have this problem, too. I have the firewall configurat the firewall that it let on port 8303. it's dosn't work:
[4d454835][register]: ERROR: the master server reports that clients can not conn
ect to this server.
[4d454836][register]: ERROR: configure your firewall/nat to let through udp on p
ort 8303
i don't now the problem.
sry for my bad engish i'm from ger.
Teeworlds Forum → Support → Internet Server hosting Problem
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.