376 Reply by unsigned char*

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

HMH wrote:

@unsigned char* @TeaTowel: here you go: https://github.com/H-M-H/Teeworlds-bina … .1-osx.dmg

@unsigned char*: you got a pullrequest, hope everything is fine smile

Thx for your work!

I think that the issues are because i use the threads in a very very very very bad way... :\

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

377 Reply by unsigned char* (edited by unsigned char* 2015-08-21 20:49:02)

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

H-Client v4.0 -Final- Released!

– Fixed: Security issue
– Fixed: Issue with history servers
– Improved: Now use libnotify on linux
– Improved: Server browser now runs smoothly, not more locks
– Improved: HTTP Downloads
– Improved: GeoIP Calls on server browser
– Improved: Skin downloader
– Added: IRC Support with “request teeworlds server” feature
– Added: ffmpeg front-end (Sound not support!)
– Other minor stuff

** Important update for linux users!

Irc Client Commands: https://hclient.wordpress.com/support/i … -commands/

Ok, this is the last release of the client! hope that enjoy it and don't have critical bugs xD... and sry for the sound with ffmpeg.. finally isn't a good way :\

Now i like work on "Android Teeworlds Map Editor"... pelya have some stuff that would be nice integrate it :B

Cheers!

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

378 Reply by unsigned char* (edited by unsigned char* 2015-08-28 00:31:55)

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

Yeah... here is it!! i know that 100000000000000 players like see it (you only see few players on stats because the counter overflow and reset to 0)..  H-Client IN GREENLIGHT!!!

http://bit.ly/1JAPNlo

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

379 Reply by Netherland

  • Netherland
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

unsigned char* wrote:

Yeah... here is it!! i know that 100000000000000 players like see it (you only see few players on stats because the counter overflow and reset to 0)..  H-Client IN GREENLIGHT!!!

http://bit.ly/1JAPNlo

I was hoping for an actual steam page :l

privet

380 Reply by unsigned char*

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

Netherland wrote:
unsigned char* wrote:

Yeah... here is it!! i know that 100000000000000 players like see it (you only see few players on stats because the counter overflow and reset to 0)..  H-Client IN GREENLIGHT!!!

http://bit.ly/1JAPNlo

I was hoping for an actual steam page :l

Trolling the troll? xDD

Cheers!

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

381 Reply by DanielTW

  • DanielTW
  • DanielTW
  • New member
  • Offline

Re: [CLIENT] H-Client v4.0.3

Cool big_smile

382 Reply by unsigned char* (edited by unsigned char* 2017-11-22 08:08:29)

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

New version comming soon...

Some 'facts' about it...

Render Speed:
H-Client: ~1800fps (New Features) - SDL v1.2
DDNet: ~600fps (New Features and much more) - SDL v2.0
Vanilla: ~1810fps (Standard Features) - SDL v1.2
GamerClient: ~2000fps (Old Features) - SDL v1.2

Loading Time [Start + 857 Server List]:
H-Client: ~25segs (64 players support) **Can start more fast if use "history" tab instead "internet"
DDNet: ~25segs (64 players support)
Vanilla: ~8segs
GamerClient: ~8seg

Download New Map + Join Server Time [300.8KiB]:
H-Client: ~2segs (HTTP Support + Take a map Preview)
DDNet: ~2segs (HTTPS Support)
Vanilla: ~10segs
GamerClient: ~10seg

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

383 Reply by Savander

  • Savander
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

You should also provide PC Specs to have better understanding of those facts! ^^ smile

384 Reply by unsigned char* (edited by unsigned char* 2017-11-26 19:59:46)

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

Hi Savander! I think it's not relevant but here's the information... I want to highlight the difference, not the amount wink

OS: Manjaro 17.1pre2 Hakoila
Kernel: x86_64 Linux 4.13.14-2-MANJARO
CPU: Intel Core i7-3770 @ 8x 3.9GHz [27.8°C]
GPU: GeForce GTX 970
RAM: 11977MiB

NVIDIA Driver Version: 384.98
Server Version Number: 11.0
Server Vendor String: The X.Org Foundation
Server Vendor Version: 1.19.5 (11905000)

Download Speed: 2.57Mbps
Upload Speed: 0.19Mbps
** Ultra super mega hyper fast connection uh? xD

Map Used: Hell 2

cheers!

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

385 Reply by Bolto (edited by Bolto 2017-12-10 06:12:39)

  • Bolto
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

So as it stands the final was not the last version, & it still stands that your client only converts Vanilla Demo's on linux to video, forgive my questions but the last update you gave that i can find is a year old. also waiting for  H-M-H might be forever so your the best we got smile so keep up the good work!

Edit: considering i've never tried this  0.7.0 trunk i can't say, didn't even know it was available to download, if you like i can test it & report back but i need a build to test.

386 Reply by unsigned char*

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

Thx Bolto! yeah... i go to call this version H-Client v4.0.1 -PRF- (Pehaps Really Final) tongue

Video Record feature on my client isn't "stable"... look's like a hack... but yeah.. "works" xD H-M-H stuff is more stable and not a hackish solution... but sound stuff is a hard task...
My implementation have a problem... for use ffmpeg to record application audio you need load a module and change a configuration file... https://trac.ffmpeg.org/wiki/Capture/ALSA ... and if use PulseAudio? hmm

The current changelog (WIP): https://github.com/Tardo/HClient/blob/master/changelog

Cheers!

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

387 Reply by CarmineZ

  • CarmineZ
  • CarmineZ
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

have you considered to export demos, in a possible way, to Html5 canvas format?

388 Reply by unsigned char* (edited by unsigned char* 2017-12-06 18:00:19)

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

@CarmineZ: Nope... but possible... perhaps other with more energy and skills do it wink  The client DDNet have a WebGL version.

I have a question for all... What do you prefer? 0.6.4 or 0.7.0-Trunk-?

+ 0.6.4
-- Compatible with the mod that all play (DDRaceNetwork) and others ofc!
-- The same as you have played during the last ~4 years

+ 0.7.0-Trunk-
-- Compatible with few mods
-- Unstable base
-- Try "boost" this version

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

389 Reply by CarmineZ

  • CarmineZ
  • CarmineZ
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

try boost 0.7 trunk is the best idea... all mods will be ported easily to have compatibility with the next new version

390 Reply by unsigned char* (edited by unsigned char* 2017-12-14 23:41:30)

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

Ook... i see, finally i only work on 0.6.x ... the "team" that can really boost 0.7 is DDRaceNetwork Team.

** AppVeyor problem fixed... **

Cheers!

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

391 Reply by unsigned char*

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

H-Client v4.0.1 Released!

- CHANGELOG

+ v4.0.1
==========
- Now only take preview's of new maps
- Added compatibility with "Show Others" in DDRaceNetwork {original code by GreyFox, ddrace team}
- Fixed server geolocation
- Support for download maps from DDRaceNetwork http servers (No SSL) {original idea by def-, ddnet team}
- Improved some critical code calls (Collisions, Rendering, ...)
- Added compatibility with sounds in DDRaceNetwork maps {original code by cinaera, ddnet team}
- Added option for customize smoke color (local effect)
- Fixed bug when try join on a server without "preview map" enabled
- Add font support for chinese, japanese, korean. {original code by awaysoft, ddnet team}
- Improved ffmpeg front-end: added variables and new options (Perhaps now works on all supported systems by ffmpeg?)
- Improved HTTP Downloader: less usage of write calls and refactored source
- Added freezed effect to "FNG" gametype
- Improved Votes: Auto-Vote No when you are the target, Show indicator on target, refactored some code...
- Added AppVeyor support (automated builds for windows) {original idea by necropotame, ddnet team}
- Added some particles to explosion effect
- Reduced the number of blood particles
- Removed corrupted skins
- Removed redundant compiler settings and fix some builds in bam.lua (Settings that I change in the past)
- Improved CircleCI (automated builds for linux) builds & package {original idea by def-, ddnet teamm}
- Added option for show off-screen players

+ DOWNLOADS
· H-Client v4.0.1 [WINDOWS 32bits]: https://github.com/Tardo/HClient/releas … -win32.zip
· H-Client v4.0.1 [GNU/LINUX 64bits]: https://github.com/Tardo/HClient/releas … _64.tar.gz

** the windows version has never been tested!!.... :S Please report bugs.. thx!

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

392 Reply by unsigned char*

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

H-Client v4.0.2 Released!

- CHANGELOG

+ v4.0.2
==========
- Improved >16 players support (now works on all servers not only ddrace)
- Added "Safe Walk" feature (+safewalk)

+ DOWNLOADS
· H-Client v4.0.2 [WINDOWS 32bits]: https://github.com/Tardo/HClient/releas … -win32.zip
· H-Client v4.0.2 [GNU/LINUX 64bits]: https://github.com/Tardo/HClient/releas … _64.tar.gz

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

393 Reply by Deepfinder

  • Deepfinder
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

As nostalgic as I am, I will download your client and play with it!

I will be banned if I troll again ...

394 Reply by CarmineZ

  • CarmineZ
  • CarmineZ
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

windows 10 OS tell that your teeworlds.exe client application is affected by Trojan:Win32/Azden.A!cl

395 Reply by unsigned char* (edited by unsigned char* 2017-12-21 01:15:33)

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

@CarmineZ ... Windows & Linux packages are build on "cloud services"... (CircleCI for linux and AppVeyor for Windows).

I run an analysis on "virustotal" and doesn't give any positive... https://www.virustotal.com/es/file/89a0 … 513807895/

Can try download directly the artifacts from here: https://ci.appveyor.com/project/Tardo/h … /artifacts

If others detect the same issue, please report!

============

I only can found that other "projects" have the same isolated issue... https://github.com/ioquake/ioq3/issues/318
you can run H-Client v4.0.1? Perhaps detects the updater url like an potential untrusted origin for download malware of something like that...

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

396 Reply by CarmineZ

  • CarmineZ
  • CarmineZ
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

to the 4.0.1 version win10 OS not detect virus but suggest to not run the application because unknown author

397 Reply by unsigned char*

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

@CarmineZ please... try this: https://ci.appveyor.com/project/Tardo/h … /artifacts

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

398 Reply by CarmineZ (edited by CarmineZ 2017-12-21 21:05:21)

  • CarmineZ
  • CarmineZ
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

I tried but again windows suggest to do not run the application because the author is unknown... other win10 OS user report the same notification?

399 Reply by unsigned char* (edited by unsigned char* 2017-12-21 22:01:33)

  • unsigned char*
  • unsigned char*
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

Ook... Windows business you know? https://docs.microsoft.com/en-us/window … ertificate (idk is this is only for software like drivers, etc..)

Other clients don't show you the same message?
Solution: Ignore the message if you can.... or set a low security level hmm


P.S: This shit remembers me this video... https://www.youtube.com/watch?v=XgFbqSYdNK4


** If a dev that use windows can explain how set the author (free way)... perhaps is other stuff and don't need be signed hmm idk how this shit works... and don't like waste my time in know it xD

Why I'm a pointer? http://3.bp.blogspot.com/-Zem9Ozn7BOo/T … itchie.jpg

400 Reply by Schwertspize

  • Schwertspize
  • Member
  • Offline

Re: [CLIENT] H-Client v4.0.3

On the other hand...... Most users shouldn't be trusted too much.... Sadly....

But the option to disable, etc would be good. Still, I personally only use windows if I need to

Having troubles finding servers in the serverlist? Go to Pastebin (its a referer cause there is daily a new pastebin) and add the lines to your settings.cfg (in %APPDATA%\teeworlds). Then open teeworlds and go to the favorites tab. (Note however, standard teeworlds client can only show 256 favorites, use ddnet instead)