Topic: [Tutorial] Teeworlds server - Synology DS
Teeworlds on a Synology DS
This is a tutorial on how to get Teeworlds server running on your Synology DS.
I take NO responsibility, if your NAS will take any damage or in any other way act weird after this tutorial! - Nothing has happened to my DS though.
The following procedure was done on a Synology DS 212+ - I can't guarantee that it will work on yours, since the DS's are produced with different CPU's, RAM, Size and so on.
Allright - Let's get going!
Step 1. Install Python and Perl
Open your browser and type in the ip address of your DS in the addressbar. Log in to your DS.
Open up your Package Center and install Python and Perl - This should be pretty easy!
Step 2. Fix the Python and Perl installation
Open up your Terminal (If linux/mac os) or Putty (If windows) and connect to your DS as root
Python fix
1. backup the pthread libraries found in /opt/arm-none-linux-gnueabi/lib/
mkdir /opt/arm-none-linux-gnueabi/lib_disabled
mv /opt/arm-none-linux-gnueabi/lib/libpthread* /opt/arm-none-linux-gnueabi/lib_disabled2. Copy the pthread libraries found in /opt/lib
cp /lib/libpthread.so.0 /opt/arm-none-linux-gnueabi/lib/
cd /opt/arm-none-linux-gnueabi/lib/3. Make symlinks
ln -s libpthread.so.0 libpthread.so
ln -s libpthread.so.0 libpthread-2.5.so
Perl fix
1. Make symlinks
ln -s /opt/bin/gcc /opt/bin/arm-none-linux-gnueabi-gcc
ln -sf /opt/bin/ld /opt/bin/arm-none-linux-gnueabi-ld
Step 3. Install IPKG / Bootstrap
This step is only necessary if you haven't Bootstraped your DS yet!
Follow the steps from 1 - 15 from this link:
http://forum.synology.com/wiki/index.ph … stall_ipkg
Step 4. Install the latest GCC and wget-ssl with IPKG
Install GCC
ipkg install gcc
Install wget-ssl
ipkg download wget-ssl
ipkg remove wget
ipkg install wget-ssl_1.12-2_arm.ipk
Step 5. Create a new shared folder
Go to your DS's web UI again.
1. Open your Control Panel
2. Click Shared Folder
3. Click on the Create button
4. Give your folder a name (In my case i called it "Servere" (Danish for servers))
5. Give your folder the appropriate permissions
6. Close yur Control Panel and go back to your Terminal/Putty
7. Type in "cd /volume1/SHAREDFOLDERNAME/"
Step 6. Download/Unzip BAM and Teeworlds
Install wget-ssl
wget --no-check-certificate http://teeworlds.com/files/bam-0.4.0.zip
unzip bam-0.4.0.zip
rm bam-0.4.0.zip
Download/Unzip Teeworlds
wget --no-check certificate http://www.teeworlds.com/files/teeworld … x86.tar.gz
tar -zxf teeworlds-0.6.2-linux_x86.tar.gz
rm teeworlds-0.6.2-linux_x86.tar.gz
Step 7. Compiling BAM and Teeworlds
Compile BAM
cd /bam-0.4.0/
./make_unix.sh
cd ..
Compile Teeworlds
cd teeworlds-0.6.2-linux_x86
../bam/bam server_release
Step 8. Run the server
Just type "./teeworlds_srv
Now you can costumize the settings for your server by adding your CFG files.
And since your created the sahred folder, you can easily access that folder through your network.
I hope everything makes sence. If you have any questions, feel free to ask, and i shall do what i can to help.
And if you have any inputs, please feel free to post them, and i will change this post.
